$ 5.00
$ 5.00
This filament is made of polyamide 12 reinforced with 8 % of aramid fibers. Its benefits are tribological properties, great chemical resistance, high stability under a wide range of temperatures, and great processing.
All of these make it suitable for the fabrication of products like an unwinding wheel, bearings, or cogwheels. It's a durable material that resists a wide range of chemicals, including car fluids.
Features:
| Working temperature: | 235–260 °C |
| Heated bed: | 80–110 °C |
| Diameter: | 1.75 mm |
| Diameter tolerance: | +/- 0.10 mm |
| The length of the filament: | 15 m |
| Available Spool variants: |
|
Comparison of our Nylon family:
| Nylon AF80 Aramid | Nylon CF15 Carbon | Nylon FX256 | |
| Tensile strength | 50.4 MPa | 54.5 MPa | 45 MPa |
| Elongation at break | 5.8 % | 103 % | 50 % |
| Impact resistance | 53.2 kJ/m² (unnotched) ★ | 86.2 kJ/m² (unnotched) ★ | 7 kJ/m² (notched) ★★★ |
| Ease of printing | ★★★ | ★★ | ★ |
| Wear resistance | ★★★ | ★★★ | ★★ |
| Creep resistance | ★★★ | ★★★ | ★ |
| Heat resistance | from -40 °C up to 140 °C | from -40 °C up to 140 °C | from -40 °C up to 140 °C |
| Heat resistance at high load | ★★★★ | ★★★ | ★ |
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.
You may also like:
Add A Review
Your email address will not be published. Required fields are marked
Your Rating