¥ 384315.61
¥ 16.99
With top-quality LED bulb upgrades for Toyota 4Runner available on Auxito, you now have the option to improve the stock lighting of your 2006-2013 4Runner. This type of LED bulb is on the 2006-2013 Toyota 4Runner. Compared with halogen lights, LED lights not only provide higher light output and better aesthetics but also reduce eye fatigue caused by driving at night and improve the safety of night driving. LED bulbs are plug-and-play, and you can easily get rid of those very dim OEM lights and get a nice upgrade.
M3 Series High Beam 9005/HB3； M3 Series Low Beam H11/H8
12000LM/set, 6500K cool white, IP65 waterproof rated.
Optimal Fitment Size
We are sure everyone is tired of the tight mounting space in the 4runner headlight assembly, and the larger-size LED bulbs will always cause you to have to replace or cut the OEM dust cover. The M3 series wireless LED bulbs are designed with 1:1 exterior dimensions to the OEM halogen lamps, offering an easy install process, without any drilling of the dust caps, and 12,000RPM high-speed cooling fans that fit nicely in the headlight module behind the dust caps.
High-Quality ZES Chips
Some diodes manufactured at low prices might not be your best long-term or short-term solution for lighting. Lower quality diodes tend to burn out fast or create problems with producing incorrect light output and beam pattern. The AUXITO M3 series LED headlight bulbs are equipped with high-quality possible chip technology. ZES LED chips, which have a higher heat-resistance rating than other LEDs.
1:1 beam mini-sized design
1:1 beam mini-sized design and position of the LED chips is close to the filament in the halogen bulbs. It is designed to give you 4Runner more light output while maintaining a safe beam pattern for oncoming traffic. Your factory cut-off line will stay at the same level but the brightness below it will shine brighter and farther down the road!
*Note: By default, DRL LEDs use a lower voltage compared to full voltage high beams. This high beam has a power input difference from the DRL, causing a communication failure between the vehicle computer system and the LED circuit. This eventually leads to flickering bulbs when the daytime running lights are turned on with the high beams off, or instrument panel errors, malfunctions, or radio interference. Consider trying to solve the problem with a decoder. Or turn off the daytime running lights and use only the high beam function.
BULB SIZE 9006/HB4
BULB SIZE H11/H8
I9 Series, DC 9-30v wide voltage, 4000lm/set, 6500K white CSP led chips, IP65 waterproof, Plug & Play, Non-polarity plugs, mini-sized body
Upgrade 4runner-led fog lights offer substantially higher light output and better aesthetics than halogen lights, improving driving visibility in inclement weather. The beam pattern is low and very wide and cuts off just past where low beams begin, filling the darker areas below the headlights perfectly.
BULB SIZE 1156/7506
25W per bulb, DC12V-24V, for 12V cars only, Amber yellow light, 24pcs 3020smd, Aviation aluminum 6063
The front turn signal led bulb uses 24 pcs and 3020 LED chips for 360° illumination, super bright. The whole aviation aluminum lamp body and hollow-out body design give the LED turn signal light efficient heat dissipation. Ensure a secure temperature range and 40,000 hours of life span.
*Note: For some sensitive vehicles, load-resistors may be needed.
The 2006-2013 4Runner tail lights are not only basic and unattractive but are also outdated as they use incandescent bulbs. Incandescent bulbs typically run hotter and do not last as long as LED. The LED tail lights will give your truck a much-needed makeover with a modern style and upgraded LED performance.
BULB SIZE 7443
14K series, DC9-18V, 1600LM/PC, Amber Yellow, No matter what the situation is, the more penetrating amber and red lights can make other drivers notice you immediately
BULB SIZE 7443
14K series, DC9-18V, 1600LM/PC, Amber Yellow, No matter what the situation is, the more penetrating amber and red lights can make other drivers notice you immediately
BULB SIZE T15/912/921
DC12V, 5.5W, 2600lm/Pair, 6000K WhiteReversing in the backcountry can be a challenge, even in light conditions. Upgrading your 4runner backup light bulbs to LED bulbs improves your daily driving and parking lot safety. LED lights throw enough light on the sides that you can easily navigate backing up without being blinded by reflection. License Plate Light Bulb T10/194 (White):12V, 2W/PC, 240LM/PC, Non-polarity design, Plug and play.
The best about upgrading to LED lights is that4runner interior gets incredibly bright light while keeping the factory light covers without the dazzling effect of exposed LEDs. The difference is night and day!
BULB SIZE T10/194
12V, 2W/PC, 240LM/PC, 6000k White
BULB SIZE 31mm
10-24V DC, 2.5W/PC, 6000K xenon white,0.63 inches in width, 1.25 inches in length
If you need the other LED bulbs, please check the model user manual or contact us by mail at [email protected]
Looking for something else? Head to our homepage
Add A Review
Your email address will not be published. Required fields are marked
Your Rating