kr 2079.21
kr 16.99
Whether you’re ready to complete a full swap-out of the vehicle lights or prefer to pick and choose, AUXITO Team offers everything you need to get started from individual LED bulbs to various kit combinations. In total, this kit replaced 12 pairs of bulbs for both the interior and exterior of the vehicle. Once the upgrade is complete, you'll rave about the safety, comfort, and design of the 5th Gen 4runner lighting.
BULBS SIZE: M3 Series High Beam 9005/HB3； M3 Series Low Beam H11/H8
These bulbs are all one designed, mini-sized, 12,000lm bright per set, 6500K, plug and play, let you see far and wider at night without blinding oncoming drivers.
Correct Beam Pattern
Beam pattern is one of the most important concerns of most 4Runner drivers when upgrading their vehicle lights, the wrong beam pattern will not provide the best lighting effect and will cause glare to oncoming traffic. The M3 Series headlights feature ultra-thin double-sided ZES chips that match the OEM beam pattern by maintaining the same wick length and position as the original halogen bulbs.
The low beam has a very sharp and flat cut-off, and the light is focused without dark spots or light flare. Allows you to focus more on driving and driving safer.
The LED interval of the bulb is about 0.03in, ultra-thin design. 360-degree illumination and no dark spots.
 |
 |
Totally Plug And Play
Because the 4Runner has a CANbus system that controls our lighting, system failure notifications occur when the bulbs with less power (LED vs. Halogen bulbs). The M3 series LED headlight bulbs with built-in intelligent IC driver, CANbus ready, are made specifically for CAN Bus-equipped vehicles.
The bulbs' built-in resistors work with the advanced computer system of your vehicle, so when your vehicle's computer reads them, It responds correctly. No error reporting, flickering and other problems during use. Compatible with 95+ Vehicles’ Systems.
We took into the small mounting space of the 4Runner headlight and the original dust caps account and designed the bulb to be mini-sized and wireless. There is no need to purchase additional dust caps or drill dust caps during installation, which is a great way to avoid moisture and dust from entering the assembly and will not reduce the life of the LED bulb.
*Note: By default, DRL LEDs use a lower voltage compared to full-voltage high beams. This high beam has a power input difference from the DRL, causing a communication failure between the vehicle computer system and the LED circuit. This eventually leads to flickering bulbs when the daytime running lights are turned on with the high beams off, or instrument panel errors, malfunctions, or radio interference.
Consider trying to solve the problem with a decoder. Or turn off the daytime running lights and use only the high beam function.
BULB SIZE: H11/H8
I9 Series, DC 9-30v wide voltage, 4000lm/set, 6500K white CSP led chips, IP65 waterproof, Plug & Play, Non-polarity plugs, mini-sized body
Not only can they add a great look to your 5th gen 4Runner but they can also dramatically improve visibility with their improved light output. The best-LED fog lights upgrading especially increase visibility in bad weather.
DC9-18V, 1600LM/PC,
Dual-color function: Switchback led bulbs will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal.
*Note: Most LED turn signal bulbs (7444NA) will hyper flash after you install them. This is because the LED bulbs are drawing less power than your factory incandescent bulbs. The package is equipped with a resistance decoder to prevent decoding problems during use.
DC 9V to 18V, 1600LM/PC, Amber yellow,
DC12V, 5.5W, 2600lm/Pair, 6000K White
Upgrade 4runner tail lights to cleaner LED lights so that the car behind you immediately notices what you do next.
BULB SIZE: T10/194 (YELLOW)
12V, 2W/PC, 240LM/PC, Non-polarity design, Plug and play.
BULB SIZE: T10/194
12V, 2W/PC, 240LM/PC, 6000k White
BULB SIZE: 31MM
10-24V DC, 2.5W/PC, 6000K xenon white,0.63 inches in width, 1.25 inches in length
The interior of the Toyota 4runner lacks high-quality light output and the yellowish-orange hue doesn’t help much with increased visibility. Dependable lighting is important for lighting up the interior or rear cargo area.
The AUXITO LED bulbs are the same size as the OEM bulb, you can upgrade to brighter LED bulbs to help increase visibility. you get the brightness of the LED board upgrades while maintaining the stock light cover and without the blinding effect of an exposed LED.
If you need the other LED bulbs, please check the model user manual or contact us by mail at [email protected]
Looking for something else? Head to our homepage
Add A Review
Your email address will not be published. Required fields are marked
Your Rating