-
SILICONE SEALS BETTER
Replace that leaky gasket in the E61 group head of your espresso machine with this neutral and aroma-free silicone gasket. The soft consistency creates a better seal and makes installation even easier. If your portafilter locks into place too far to the right due to a worn group or portafilter, then this is the gasket to make your life easier. This thicker gasket is designed to fit worn groups and/or portafilters in E61 group heads.
-
- 8.5mm thicker design matches standard E61 group head gaskets but solves the problem of group/portafilter wear
- Heat resistant silicone
- Forms tight seal without tightening the portafilter as much as a standard gasket
- Fits all espresso machines with E61 group heads that have wear in the group head and/or portafilter
- 73mm x 57mm x 8.5mm Blue Silicone Gasket
- Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
- Use the portafilter with the basket removed to install the gasket to avoid breakage
-
Use to replace the old gasket on your E61 espresso machine.
Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
Add A Review
Your email address will not be published. Required fields are marked
Your Rating