CREATBOT PEEK-300 2ND GENERATION ULTRA HIGH PERFORMANCE HIGH TEMPERATURE PEEK ULTEM 3D PRINTER
Ultra high temp. nozzle/bed
Advanced Thermal System
Direct Annealing System
Water Cooling/ Heat Isolation System
Medical/ Industry Application
Why Choose to Purchase from MachineShark?
MachineShark guarantees the best price and service available online. We promise fast and free shipping directly from the Creatbot USA warehouse. We work very closely with Creatbot allowing our customers to receive the quickest and the most helpful support. We ensure products are shipped out in perfect condition and offer lifetime support.
Use Code "CREATBOT7" at checkout for 7% Off + FREE Shipping & No added taxes.
Direct Annealing Temperature:0-400°C
Direct Annealing System (DAS), the world's first and extraordinary technology by CreatBot. Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. (The technology is patent protected and available by CreatBot only)
Smart Auto-rising dual extruders500 ℃
The PEEK-300 equiped with CreatBots new technology smart Auto-rising dual extruders. Water cooling, DAS system, Auto-rising extruders. The dual nozzle temperature up to 500°C. You can print any 3D printer materials in the world.
Hotbed200 ℃
Common but necessary. Base of printing big models with no warping.
Hot Chamber120°C
Outstanding and important. The protector of no cracking printing.
Triple Heat Isolation
Triple heat isolation is made of double insulation chamber, advanced insulation materials and vacuum double PC boards. It is guarantee of ultra performance and safety.
Cooling System
Cooling system is one of the important parts to constitute the whole thermal system. It is made of (1) liquid cooling. Circulating liquid can be used effectively for a long time. (2) Air pump cooling. Air pump provide cold air from outside instead of hot air inside chamber.
HEPA Air Filtration
The air filter system can absorb impurities and gases that are generated by printing special filament, safer and more environmental protection which is more suitable for houses, schools, and office spaces.
Resolution0.04mm
0.04mm is an available resolution for normal plastics, but it is an extraordinary resolution for high warping and high deformation materials. 3D printing high performance material need not only high temperature, but better cooling. For high resolution with high small details, high temperature will ruin layers to a mess if heat and cooling are not in a balance.
Material Performance Comparison Chart
Printing
Build Volume
Single Extrusion: 300*300*400 mm Dual Extrusion: 240*300*400 mm
Filament Diameter
1.75mm
Number of Nozzles
Dual Extruder
Print Speed
10-150mm/s
Nozzle Diameter
0.4mm (0.3~1.0mm optional)
Filament Compatibility
Engineering Plastics: PLA, ABS, ASA, PC, Nylon, PETG, PVDF,TPU,Carbon Fiber； High temperature Material: UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI(ULTEM)； Ultra-performance material: PEEK,CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), PEKK, etc.
Software
Software
Creatware, Simplify3D, Cura, Slic3r
Operating Systems
Win7/8/10
Print File Type
STL, OBJ, AMF, Gcode
Special Function
Outage Restored
Save data when power is off
Filament Detection
Pause printing when filament runs out
Direct Annealing System (DAS)
Annealing process is instantly controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size, functional materials.
Heat insulation
Triple heat insulation
Emergency stop switch
Support emergency stop
High temperature accessories
High temperature resistance motors, linear rails, belts and circuits to ensure long high temperature printing.
CreatBot was established in 2011 and has now become one of the largest professional 3D printer manufacturers in central China.
CreatBot provides reliable, efficient and professional 3D printing solutions to business markets where safety, quality and tangible results justify investments. From trusted, high-performance machines with dedicated software to a vast range of printing materials, our products are both innovative and accessible. CreatBot is a solid partner who supplies your business with the latest 3D printing technologies to enhance your projects, minimize product development timelines and push you forward ahead of the competition.
Warranty
After-sale Service
Whether you’re having a problem with something you bought from us, or just have some questions about us, we’re always happy to help. Whenever you have a question, just head over to our support team via[email protected]to get in touch with our team. We do our best to get back to you as soon as possible and offer email service Monday-Friday. You should receive a response in 24 hours. We also schedule Skype online support as needed. Start a support case with us, and if we can’t resolve it quickly via email, we’ll be happy to talk to you on Skype.
Warranty
CreatBot represents and warrants to the first End-User of original products that the products shall materially conform to CreatBot’s published specifications in effect as of the date of delivery, subject to the terms and conditions below.
Warranty Period
6 months after date of delivery to first End-User.
Return Policy
CreatBot accepts returns on a very limited basis: for any electronic items, returns are only accepted on devices which have serious and irreversible quality defect problem, meanwhile, the End-User must apply for the returns within 3 calendar days from the date of delivery.
Return Process
If returns or changes are acceptable by both, the brief return process will be as below:
Contact with our sales team to offer the photo to show the printer condition.
If printer condition is OK, we will refund you 30% of the money in advance.
Please ensure to use the original packing box it pack the printer p-4 rounded-lg bg-light border to avoid the damage of transportation, and return the machine by our appointed express.
Show us the tracking number, after confirming the tracking number, we will refund you 40% of the money.
After we receive the machine and confirm the printer condition, we will refund you the rest of 30%.
Exclusions
The warranty obligations do not cover physical damage sustained from improper handling during shipping as p-4 rounded-lg bg-light border as normal wear and tear in use of Product. The warranty shall be voided if alleged Product failure was caused in whole or part by: (i) unauthorized modifications, alterations or repair; (ii) parts or Consumables were installed and used that were not certified or approved by CreatBot or its designated representative, including without limitation the use of filament not from CreatBot; (iii) unusual physical or electrical stress; (iv) abuse, misuse, accident, neglect; (v) exposure to moisture, flooding, fire, electrical problems associated with incoming power or other acts not the fault of CreatBot; (vi) not adhering to CreatBot’s recommended maintenance procedures or failure to comply with Product instructions and/or documentation; (vii) to the extent allowed by applicable law, the Product has been removed from the country or region where it was originally sold by CreatBot or its designated representative. No coverage under the Warranty will exist if CreatBot was not notified of the alleged defect or malfunction prior to the expiration of the Warranty Period. CreatBot shall make the final determination as to the existence and cause of any alleged defect.
Shipping
ORDER CONFIRMATION
As soon as your order is placed, you will receive an order confirmation e-mail. This confirms your order has been received in our system and your credit card is authorized for purchase. As soon as we receive your order, we begin processing to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will reach out to you via e-mail to confirm if you'd like to keep your order or cancel for a full refund. If your item(s) are available for immediate shipment, we will process the charges and submit the order for shipment.
ORDER SHIPMENT
Please reference your product page specific lead times. After shipment, items will arrive in 2-7 business days.
Some models are custom made, and can take as long as 4-5 weeks to ship depending on the model and series. Please contact customer service before ordering if delivery time is a concern of yours.
*Processing & Handling Time for all Creatbot products are typically 10-12 business days
All Creatbot products are shipped directly from China.
The customs fee of your country may apply. The buyer is responsible for all import tariffs.
Certain items due to high demand and low supply can only be placed on back order at specific times. Please contact customer service to hear about any items availability.
Please contact us for rush shipping rates and options. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within four business days of your order, feel free to follow up with us at [email protected].
Large items that ship via freight (not UPS or Fedex) require a signature upon delivery. You will receive a call from the shipping company to arrange a time and day for delivery that works for you.
PRODUCT QUALITY GUARANTEE
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should REFUSE the package, and make note of it on the delivery receipt. If your item(s) do arrived damaged, please contact us immediately and send photos to [email protected]. We will process an insurance claim on your behalf and happily work with you to resolve the issue and refund or replace your order.
CANCELLATIONS & REFUNDS
Generally, most of the items we carry can be returned within 30 days of receipt in new condition and unopened.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with. Please contact the manufacturer for any warranty issues.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight (not by UPS, Fedex, USPS, etc).
Some items may be subject to a 15% restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping". Any damages to products may void the return.
Returns must be accompanied with an RMA number. Please contact us in order to have one generated.
Should you have any questions about a particular product’s return policy we’re here to help. Please contact us and we will respond within 24 hours.
As stated in the Product Quality Guarantee, any item that arrives in less than perfect condition or missing parts will be handled at no extra cost.Refunds will be issued to the original credit card that you use when placing your order.
It is the customers' responsibility to confirm the product will comply with their state, county or city codes. If you will be receiving an inspection by a county or city inspector, please ask them what they require.
Add A Review
Your email address will not be published. Required fields are
marked
Your Rating
Newsletter
Subscribe to our newsletter and get 30% off your first purchase
Add A Review
Your email address will not be published. Required fields are marked
Your Rating