This PLA Sparkle and Galaxy / Glow In Dark Filament is an ideal choice for those looking for a high-quality 3D printing material. The 1.75mm diameter is compatible with most 3D printers and the 1kg spool provides plenty of material for most projects. You can select from glow in dark or sparkle glitter infused filament depending on your project.
- Ideal for everyday printing with added glitter for extra sparkles.
- Cardboard spool and packaging
- Burnt Titanium / Nebula Purple is mixed extrusion with added glitter/sparkle
- Vacuum sealed bag with an additional re-usable mylar bag
-
Diameter: 1.75mm (+/- 0.03mm)
-
Net weight: 1KG
-
Density: 1.25 g/cm3
-
Empty Cardboard Spool: ~145g
Cardboard Plastic Spool Ring for Bambu Lab AMS (Spool suitable for AMS/AMS Lite): https://support.dremc.com.au/en/support/solutions/articles/51000342355-dremc-filament-snap-on-addon
Note: The Sparkle Matte Black is more subtle sparkle compare to other colour option.
Printing Settings
Larger than >0.4mm nozzle is recommended for sparkle filament.
Print Profile Example: https://support.dremc.com.au/en/support/solutions/articles/51000343310-dremc-filament-3d-printing-profile
For best results, dry filament using a filament drier before use or print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] Filament Drying Guide
| Nozzle Temperature |
190°C - 220°C |
| Build Plate Temperature |
50°C - 60°C |
| Build Surface Material |
Works well with most common build surfaces. |
| Build Surface Treatment |
Typically none required. Some surfaces such as glass work best with PVA glue stick or Magigoo . |
| Cooling Fan |
ON |
| Printing Speed |
30 mm/s - 200 mm/s |
| Retraction |
The ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help.
Direct Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm/s
Bowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm/s |
| Drying Recommendation |
~50°c for 4-6hrs (Only dry if filament is wet, over drying/repeat drying can damage filament) (Filament Dryer Guide)
|
| Storage |
Keeping filament in an airtight container with new/dried desiccant.
|
| Support Material |
Single Extrusion:
Self Support
Idex/Tool Changer:
DREMC PVA
|
Based on 0.4 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.
Sample print STL : https://www.printables.com/model/1165 , https://www.printables.com/model/425766
Spool Size:
- Spool Diameter: 198mm (+/-1mm)
- Spool Hub Diameter: 53mm (+/-1mm)
- Spool Width: 65mm (+/-1mm)
Add A Review
Your email address will not be published. Required fields are marked
Your Rating