| Specifications |
IE-3300-8P= |
| Power Consumption |
14W (Power consumption for non PoE supported model is measured at 12V and for the PoE supported model is measured at 54V.) |
| Operating Temperature |
-40°C to +70°C (40 LFM vented enclosure)
-40°C to +60°C (sealed enclosure)
-34°C to +75°C (Min. 200 LFM fan or blower-equipped enclosure)
+85°C (type tested for 16 hours) |
| Storage Temperature |
-40 C to +85 C |
| Operating Altitude |
Up to 15,000 feet |
| Storage Altitude |
15,000 feet |
| Mean Time Between Failures (MTBF) |
2,931,233 |
Industrial Automation Control
System |
IEC 62443-4-1
IEC 62443-4-2 |
| Electromagnetic emissions |
FCC 47 CFR Part 15 subpart B Class A
EN 55032/CISPR 32 Class A
VCCI Class A
AS/NZS CISPR 32 Class A
CISPR 11 Class A
ICES 003 Class A
CNS 13438 Class A
KN 32 Class A
EN 300 386 |
| Electromagnetic immunity |
CISPR 24
EN 55024
KN 35
EN 61000-4-2 Electro Static Discharge (air 15kV, contact 8kV)
EN 61000-4-3 Radiated RF (10V/m UTP, 20V/m STP)
EN 61000-4-4 Electromagnetic Fast Transients (4kV)
EN 61000-4-5 Surge (2KV/1KV Power, 4KV STP)
EN 61000-4-6 Conducted RF (10Vrms UTP)
EN 61000-4-10 Damped Oscillatory Magnetic Field (100 A/m)
EN 61000-4-16 Conducted CM Disturbances (30V, Cont/300V, 1 sec)
EN 61000-4-17 Ripple Immunity DC Power (10%)
EN 61000-4-18 Damped Oscillatory Wave (2.5kV, 1MHz)
EN-61000-4-29 DC Voltage Dips and interruptions |
| Industry standards |
EN 61000-6-2 Industrial Immunity
EN 61000-6-4 Industrial Emissions
EN 61000-6-1 Light Industrial Immunity
EN 61326-1 Measurement, Control and Laboratory Equipment
IEEE 1613 Electric Power Stations Communications Networking
EN/IEC 61850-3 Electric Substations Communications Networking
EN50121-4 Railway Signaling and Telecommunications Apparatus
EN50155- Railway applications - Rolling stock
ODVA Industrial EtherNet/IP
NEMA TS 2-2016
IP30 |
| Marine I |
DNC Certification according to class guideline DNV-CG-0339
Additional Standards:
IEC 60945, IACS UR E10 |
Safety standards and
certifications
|
Information technology equipment:
UL/CSA 60950-1, IEC 60950-1 CB with all country deviations
UL/CSA 62368-1, IEC 62368-1 CB with all country deviations
Industrial floor (control equipment):
UL/CSA 61010-2-201
CB report and certificate to IEC/EN 61010-2-201
Hazardous locations:
UL121201 (Class l, Div 2, groups A-D)
CSA 213 (Class l, Div 2, groups A-D)
UL/CSA 60079-0, -15 (Class l, Zone 2, Gc/IIC)
IEC 60079-0, -15 IECEx test report (Class l, Zone 2, Gc/IIC)
EN 60079-0, -15 ATEX certificate (Class l, Zone 2, Gc/IIC) Cabinet enclosure required |
| Humidity |
Relative humidity of 5% to 95% non-condensing
IEC 60068-2-78
IEC 60068-2-30 |
| Shock and vibration |
IEC 60068-2-27 (operational shock, 50G, 3ms, half sine)
IEC 60068-2-27 (non-operational shock, 65-80G, 9ms, trapezoidal)
MIL-STD-810, Method 514.4
IEC 60068-2-6 (vibration-sinusiodal, 5Hz-150Hz)
|
| Corrosion |
IEC 60068-2-52 (salt fog)
IEC 60068-2-60 (flowing mixed gas) |
Add A Review
Your email address will not be published. Required fields are marked
Your Rating