| Specifications |
HPE Aruba 2930M 24G Switch (JL319A) |
| I/O ports and slots |
20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T); Duplex: 10BASE-T/100BASE-TX:half or full;1000BASE-T:full only
4 Combo 10/100/1000BASE-T or
100/1000Mbps SFP Ports |
| Additional ports and slots |
1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB A port for uploading/ downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included) |
| Physical characteristics |
| Dimensions |
1.73" (Height) x 17.42" (Width) x 12.77" (Depth) (4.39cm x 44.25cm x 32.43cm) |
| Weight |
9.81 lbs 4.45 kg |
| Memory and Processor |
Dual Core ARM Cortex A9 @ 1016 MHz
1 GB DDR3 SDRAM
Packet Buffer Size: 12.38MB and 4.5MB Ingress/7.875MB Egress
4GB eMMC |
| Performance |
IPv6 Ready Certified |
| 10 Mbps Latency |
< 98.5µs
(FIFO 64 byte packets) |
| 100 Mbps Latency |
< 11.8µs (FIFO 64-byte Packets) |
| 1000 Mbps Latency |
< 3.1µs (FIFO 64-byte packets) |
| 10 Gbps Latency |
< 3.4µs (FIFO 64-byte packets) |
| Throughput |
95.2 Mpps |
| Stacking Performance |
100 Gbps |
| Switching Capacity |
128 Gbps |
| Switching Capacity (Including Stacking) |
228 Gbps |
| Routing Table Size |
2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP |
| Mac Address Table Size |
32768 entries |
| Environment |
| Operating Temperature |
32°F to 131°F (0°C to 55°C) up to 5000ft, 32°F to 122°F (0°C to 50°C). Derate -1 degree C for every 1000 ft from 5000 ft to 10000 ft |
| Operating Relative Humidity |
15% to 95% (Non-condensing) 10,000 ft |
| Non-Operating/ Storage Temperature |
-40°C to +70°C up to 15000 ft |
| Non-Operating/ Storage Relative Humidity |
90% at 65C (non-condensing); 15,000 ft |
| Acoustic |
Sound Power LWaD=4.0 Bel, Sound
Pressure LpAm, Bystander = 22.8 dB |
| Primary Airflow Direction |
Port to Power |
| Electrical Characteristics |
| Frequency |
50/60Hz |
Maximum Heat
Dissipation |
168 BTU/hr
177 kJ/hr |
| Voltage |
JL085A PSU: 100-127/200-240 |
| Current |
JL085A PSU: 0.5A/0.3A |
| Maximum Power Rating |
49W |
| Idle Power |
34W |
| PoE Power (Max Possible) |
N/A |
| Hibernate Power |
11W |
| Notes |
Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provide for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
Add A Review
Your email address will not be published. Required fields are marked
Your Rating