$ 411272.41
$ 1.00
Perfect for making two rooms out of one, the Mounted Straight Divider with Door includes everything you need to assemble a sleek, modern, new modular wall with a door anywhere in your home.
To assemble, first snap the panels together using the included connectors, which fit into the receiving holes on each panel like life-sized puzzle pieces. Once the panels are connected, simply mount the Wall Mounting Bracket onto your existing wall and nest the assembled panels into the bracket. Finally, secure the wall kit by screwing the bracket into both your wall and the panels.
Need a custom size? Contact Us via live chat, email, or phone!
Wall + Anchor Panels
Our signature Wall and Anchor Panels are 3” thick and made of Moisture and Impact Resistant Fiberglass. For Wall Dividers that require half-foot width increments, 12” wide perpendicular return wall panels are added to achieve the desired width. All Wall and Anchor Panels snap together easily using Lug and 2-Way Connectors for a stable and secure fit.
Wall Mounting Brackets (x2)
The Wall Mounting Brackets allow you to easily attach your new Wall Divider to your existing walls. Made of PVC, the bracket is designed to be strong yet flexible and easy to drill into. Simply drill two holes through the bracket into your wall, insert the included screws, nest the panels into the corner of the bracket, and add two more screws into the side of your panels. For detailed instructions, see the "assembly" tab above.
Accordion Door Kit
The included accordion door kit is 36" wide with a maximum opening of 30".
It includes a specialized lintel piece with a track that allows the door to be easily assembled and installed on our modular walls. The door kit includes a double-sided handle, and an integrated magnet to hold the door in position when closed.
Note the door is placed on the width of the wall in the most economical position. If you have a special request for the door placement reach out to us, and we can customize the kit to match your requirements (additional costs may apply)
Lug and 2-Way Connectors
Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly.
Finishing Caps
Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall.
For walls above 6' in height, finishing caps for the top are not included, as the top is out of view. Extra finishing caps can be purchased from our 'Accessories' page.
Because this model is attached on both sides to your existing walls, you'll want to measure your space.
1. Ceiling height: Your ceiling should be at least 2 inches higher than the height of the wall you're purchasing.
For example, the minimum ceiling height for the 8' wall to be assembled comfortably is 8'2". Do not try to fit an 8' wall under an 8' ceiling, without a small gap it will be impossible!
2. Wall-to-wall width: The included wall mounting brackets are 3"x3" wide. This gives you around 3" of leeway (1.5" on each side) when it comes to the maximum width of your space from wall-to-wall.
For example, if you're looking at the 138" wall kit, the wall-to-wall width of your space can be anywhere between 138"-141".
3. Floor width: The width of your room along the floor (from the inside of the baseboard on each side) should be no less than the width of the wall you're purchasing.
For example, if you're looking at the 138" wall kit, from baseboard-to-baseboard should be no less than 138".
Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.
Door Positioning
By default doors are placed in the most economical position. If you have a preference for the placement of the door, please reach out to us, and we can check if that is possible with your dimensions, or if we can do a custom order for you.
Note that doors do need to have a least 1ft of wall panel on each side.
Have a question about measurements? Your space doesn't seem to fit any of our available sizes? Contact us, we probably have a custom configuration that works for your space!
Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed.
Note that a drill and/or screwdriver is recommended for installing the accordion doors and mounting the wall kit to your existing walls.
If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at [email protected] or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).
*Depending on the size of your wall kit
Add A Review
Your email address will not be published. Required fields are marked
Your Rating