| Specifications |
Palo Alto PAN-PA-5450-DC-SYS Firewall |
| PA-5450 Configured System (All tests performed with 2 Networking Cards + 4 Data Processing Cards populated, unless otherwise noted.) |
|
| Firewall throughput (HTTP/appmix) ( Firewall throughput is measured with App-ID and logging enabled, utilizing 64 KB HTTP/appmix transactions.) |
200/200 Gbps |
Threat Prevention throughput (HTTP/appmix) (Threat Prevention throughput is measured with App-ID, IPS, antivirus, antispyware, WildFire, DNS Security, file blocking, and logging enabled,
utilizing 64 KB HTTP/appmix transactions.) |
121.6/152 Gbps |
| IPsec VPN throughput (IPsec VPN throughput is measured with 64 KB HTTP transactions and logging enabled.) |
85 Gbps (This test performed with 1 Networking Card + 5 Data Processing Cards populated.) |
| Max concurrent sessions (Max concurrent sessions are measured utilizing HTTP transactions.) |
100M (This test performed with 1 Networking Card + 5 Data Processing Cards populated.) |
| New sessions per second (New sessions per second is measured with application override, utilizing 1 byte HTTP transactions.) |
3.6M (This test performed with 1 Networking Card + 5 Data Processing Cards populated.) |
| Virtual systems (base/max) (Adding virtual systems over base quantity requires a separately purchased license.) |
25/225 |
| PA-5450 Networking Features |
| Interface Modes |
L2, L3, tap, virtual wire (transparent mode) |
| Routing |
OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing
Policy-based forwarding
Point-to-Point Protocol over Ethernet (PPPoE) and DHCP supported for dynamic address assignment
Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3
Bidirectional Forwarding Detection (BFD) |
| SD-WAN |
Path quality measurement (jitter, packet loss, latency)
Initial path selection (PBF)
Dynamic path change |
| IPv6 |
L2, L3, tap, virtual wire (transparent mode)
Features: App-ID, User-ID, Content-ID, WildFire, and SSL decryption
SLAAC |
| IPsec and SSL VPN |
Key exchange: manual key, IKEv1 and IKEv2 (pre-shared key, certificate-based authentication)
Encryption: 3des, AES (128-bit, 192-bit, 256-bit)
Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512
GlobalProtect Large Scale VPN for simplified configuration and management*
Secure access over IPsec and SSL VPN tunnels using GlobalProtect Gateway and Portals (Requires GlobalProtect License.) |
| VLANs |
802.1Q VLAN tags per device/per interface: 4,094/4,094
Aggregate interfaces (802.3ad), LACP |
| Network Address Translation |
NAT modes (IPv4): static IP, Dynamic IP, Dynamic IP and Port (port address translation)
NAT64, NPTv6
Additional NAT features: Dynamic IP reservation, tunable Dynamic IP and Port oversubscription |
| High Availability |
Modes: active/active, active/passive, HA clustering
Failure detection: path monitoring, interface monitoring |
| PA-5450 Hardware Specifications |
| PA-5400-NC-A Networking I/O |
100/1000/10G Cu (4), 1G/10G SFP/ SFP+ (12), 40G/100G QSFP28 (2); minimum 1 NC and maximum 2 NCs per system; 2 NCs require 2 or more DPCs installed |
| PAN-PA-5400-MPC-A Management I/O |
SFP/SFP+ MGT (2), SFP/SFP+ HA1 (2), HSCI HA2/HA3 QSFP+/ QSFP28 (2), RJ45 serial console (1), Micro USB serial console (1) |
| Storage Capacity |
480 GB SSD, RAID1, system storage
4 TB SSD, log storage (optional) |
| Max BTU/hr |
8,828 |
| Power Supplies (Base/Max) |
(2/4) |
| AC Input Voltage (Input Frequency) |
100–120 VAC & 200–240 VAC (50–60 Hz) |
| AC Power Supply Output |
2,200 watts/power supply |
| Max Current Consumption |
AC: 100–120 VAC, ~14 A max. per input 200–240 VAC, ~12.5 A max. per input
DC: 48–60 VDC, 52 A max. per input |
| Max Inrush Current |
AC: 35 A @ 230 VAC, 35 A @ 120 VAC
DC: 50 A @ 72 VDC |
| Rack Mount (Dimensions) |
5U, 19” standard rack
8.75” H x 30.25” D x 17.38” W |
| Maximum Time Between Failure (MTBF) |
Configuration dependent; contact your Palo Alto Networks representative for MTBF details |
| Safety |
cTUVus, CB |
| EMI |
FCC Class A, CE Class A, VCCI Class A, KCC Class A, BSMI Class A |
| Environment |
Operating temperature: 32°F to 122°F, 0°C to 50°C
Nonoperating temperature: -4°F to 158°F, -20°C to 70°C |
Add A Review
Your email address will not be published. Required fields are marked
Your Rating