THERMAX PPSU (500g)

(0.0) Rating

$ 8499.99 ~~$ 15.00~~

Quantity :

Add to cart

Brand :3DXTech

Availability : In Stock

Sold By :ThinkRobotics.com

ThermaX™ PPSU 3D Printing Filament

ThermaX™ PPSU [Polyphenyl Sulfone] is considered one of the highest performance plastics in the industry. This high-temperature amorphous polymer that offers excellent mechanical, thermal, and chemical resistance properties.

Polyphenylsulfone (PPSF or PPSU) is a high-temperature aromatic sulfone polymer. Long considered to be one of the highest performance polymers in the plastics world. PPSU has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, industrial, medical, semi-con applications. Previously only available to Stratasys® customers – now you can print with this ultra performance polymer.


Extruder Temp: 360-390°C	Bed Temp: 140-160°C	Heated Chamber: Recommended	Nozzle Specs: No special concerns

Supports: Works best with HTS break-away support	Drying Specs: 120°C for 4+ hours	Layer Height: No concern	Bed Adhesion Nano Polymer Adhesive

Benefits of ThermaX™ PPSU:

Very high thermal properties superior to Ultem™ 1010
Tg of 220°C and HDT of 205°C
High Environmental Stress Crack Resistance (ESCR)
Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization
Exceptional strength and modulus, even at elevated temperatures
Outstanding impact resistance
Highly resistant to even large (10 Mrd) doses of gamma radiation
Resists most common automotive fluids including gasoline, antifreeze, transmission fluids, motor oils, power steering fluid, windshield washer fluid (ESCR, 24 hrs, 100°C)
Inherently flame retardant with low smoke evolution and low smoke toxicity
Excellent dimensional stability with low creep sensitivity, low and uniform coefficient of thermal expansion, and highly reproducible part-to-part dimensions.

Benefits of 3DXSTAT™ Include:

Consistent surface resistivity
Improved retention of impact & elongation
Low particulate contamination
Minimal contribution to outgassing and ionic contamination

TECHNICAL DATA SHEET

SAFETY DATA SHEET

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

1.37g/cm3 density

Recommended PPSU Print Settings:

Extruder: 340-390°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive and 3DXTECH Polyimide Tape work best for us.
Heated Chamber: Recommended
Supports: ThermaX™ HTS High-Temp Support is designed specifically to work with high-temp materials like this one.
Other: No cooling fan and print speeds of 16 mm/s as a starting point.
Drying Instructions: 120°C for 4 hours.

Add A Review

Your email address will not be published. Required fields are marked

Your Rating

Your Name*

Your Email*

Write a review*