Transition "Mystery" Color CoexFlex™ 60A TPU
CoexFlex™ 60A TPU is, by far, the most flexible filament on the market. At Shore 60A, it is much softer than Ninjaflex or Filaflex, feels like a rubber band, and produces finished parts that are completely flexible no matter what infill density you use. Highly functional for applications that require stretch, flexibility, or compliance. (NOTE: Only printable with select printers capable of printing this durometer of filament. A direct drive extruder is required.)
Note: These are not a rainbow filament. The color change in each spool will vary and be very gradual.
Benefits of CoexFlex™ 60A TPU
- Excellent layer adhesion
- Incredible flexibility and elasticity
- Great durability
Uses
- Soft handles and grips
- Protective cases and skins
- Custom-shaped seals and gaskets
- Soft and flexible functional parts
Recommended print settings
- Hotend Temperature: 205°C – 215°C (DO NOT approach or exceed the material breakdown temperature of 230°C)
- Bed Temperature: Bed heating not recommended.
- Recommended build surfaces/adhesives:
- BuildTak
- PEI
- Kapton Tape
- Hairspray
- Magigoo Flex
- Magigoo
- Painter’s Tape
- Print speed – up to 40mm/s. Start very slow (20mm/s) and work up from there. Slow down for bridging and infill.
- Extrusion multiplier – up to 1.25 compared to rigid material, depending on extruder tension
- Extrusion width – 105% of nozzle diameter (0.42 for a 0.4mm nozzle)
- Part cooling fan recommended
Add A Review
Your email address will not be published. Required fields are marked
Your Rating