Ventis HE325 ZC Wood Fireplace with Blower - Unit VB00018

Product Description

The HE325 is a large-capacity unit that features non-catalytic technology for a clean burn and a stainless-steel secondary-air system, which improves gas combustion. The retractable doors create an unrivaled experience, and the unit includes a blower for additional heat circulation. The Ventis HE325 large-sized, double-retractable door, wood-burning fireplace is the perfect hybrid between a decorative and high-efficiency fireplace recommended for heating larger spaces between 750 - 2,500 sq.ft. This unit is approved for mobile home installation with fresh-air intakes. The firebox is lined with molded refractory bricks for better heat distribution. This unit has a 9-hour maximum burn time, can hold 18" logs, and is EPA 2020 approved.

Features

• 2.9 cu. ft. firebox
• Heating capacity 850 to 2,200 sq. ft.
• Optimum efficiency: 72%
• Double C-Cast baffle
• Non-catalytic combustion technology
• Emissions: 0.99 g/h
• BTU/hr, seasoned cord wood: 80,000
• 2.9 cu. ft. firebox
• Heating capacity 850 to 2,200 sq. ft.
• Optimum efficiency: 72%
• Double C-Cast baffle
• Non-catalytic combustion technology
• Emissions: 0.99 g/h
• BTU/hr, seasoned cord wood: 80,000

Required Option: 

- (VBA1570) Faceplate required to complete this unit. Not Included, Sold Separately.

Appliance Performance

• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• This appliance is officially tested and certified by an independent agency.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• Carbon monoxyde.

General Features

Product Documents

Product Catalogue
Appliance Dimensions
Installation and Operation Manual
Fresh Air Intake Adapter Installation Instructions