Ventis HE350 ZC Wood Fireplace with Blower, Fireplace Only VB00005 

Product Description

The HE350 features a 4.3 cu. ft. firebox and is ideal for heating a large room. It features non-catalytic technology for a clean burn, and it includes a blower for additional heat. It is recommended for heating larger spaces from 1,000 - 2,800 sq. ft, with a maximum burn time of up to 11 hours and 95,000 BTU/hr maximum. It has an automatic or manual adjustment of combustion air supply, the firebox is lined with molded refractory bricks for better heat distribution, and the unit has a stainless steel secondary-air system, which improves gas combustion. The HE350 is EPA 2020 approved.

Features

• 4.3 cu. ft. firebox
• Heating capacity 850 to 2,800 sq. ft.
• Optimum efficiency: 69.7%
• Double C-Cast Baffle
• Non-Catalytic Combustion Technology
• Emissions: 1.6 g/h
• BTU/hr, seasoned cord wood: 95,000
• 4.3 cu. ft. firebox
• Heating capacity 850 to 2,800 sq. ft.
• Optimum efficiency: 69.7%
• Double C-Cast Baffle
• Non-Catalytic Combustion Technology
• Emissions: 1.6 g/h
• BTU/hr, seasoned cord wood: 95,000

Required Option

• (VBA1540) Traditional faceplate and (AC02360) Classic molded refractory brick panels required to complete this unit. Not Included, Sold Separately.

Appliance Performance

• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• This appliance is officially tested and certified by an independent agency.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• Carbon monoxyde.

General Features

Product Documents

Product Catalogue
Appliance Dimensions
Installation and Operation Manual
Fresh Air Intake Adapter Installation Instructions