- Cut your text or design in reverse and weed out excess film.
- Set your heat press to 135°C. (if you experiencing over puffing, please reduce the temperature. You can achieve good puffing results as low at 110°C).
- Apply medium and even pressure across your transfer.
- Press for 10 seconds.
- Hot peel the release liner immediately, and remove from the platen while giving the garment a shake.
- METALLIC PUFF ONLY - Follow steps as above then PRESS AGAIN for 5 Seconds BEFORE removing from the platen.
NB: All information is given as guideline. We always recommend that you perform a test cut and print prior to production.
